Correction and Clarification: Article: Explosive Evidence at WTC Cited by Former CDI Employee |
News - News Releases By AE911Truth | |||
Written by Darcy Wearing and Richard Gage, AIA | |||
Saturday, 10 July 2010 00:50 | |||
Article: Explosive Evidence at WTC Cited by Former CDI Employee Posted Correction
We would like to also note that neither the authors nor the interviewee, Tom Sullivan, intended to imply that this particular device was used in the WTC destruction. We don’t know exactly what was used. That is why we need a thorough investigation. Our intention was to note that the technology for self consuming consolidated thermite cases existed as far back as 1984. In our DVD 9/11: Blueprint for Truth, we do show the 1999 patent for a thermite-based cutter charge which is designed to eject molten copper or iron through the orifice in “hundreds of milliseconds,” and is capable cutting through thicker structural steel more efficiently. This thermite-based cutter charge has distinct advantages over more traditional high explosive cutter charges. From the patent description: “A primary disadvantage of explosive shaped charges is that they generate excessive noise and debris upon detonation. This noise and debris can pose potentially serious health and safety hazards to someone using a cutting device which employs conventional shaped charge explosives. So, this may provide explanation as to why the perpetrators used such devices – if in fact they were used - in these deceptive controlled demolitions. (We do not have much evidence to conclude that they were used in the Twin Towers – whose debris pile was fairly extensively photographed). However, in the case of WTC 7, from which we have not been provided close-up photos during the clean-up process, we do have very interesting documentation from FEMA BPAT Report in Appendix C, along with photos and witnesses of pools of molten metal, which may provide such evidence. The authors describe severe high temperature corrosion, intergranular melting, rapid oxidation, and evaporation of the ends of steel structural members. Remember, WTC 7 was not the extreme explosive event that the Twin Towers were. It was an implosion, during which there are far fewer witnesses describing hearing and feeling the explosions. So it may be more likely a traditional demolition but using thermite incendiary cutter charges, where as the Twin Towers may have been destroyed with more explosive materials like C4 and the nano-thermitic composite explosives (which have been documented in other articles). Also, it is quite conceivable, given the 16 year span of time between 1984 and 2001, that these two technologies could have been combined to produce a thermite based cutter charge whose casing is also made of consolidated thermite. This must still be researched. Posted Clarification: We used the Hi Ex system as an example in the article of a wireless detonation system that existed long before 9/11/01 and that was capable of stand–off distances of 5 kilometers – eliminating the requirement for “miles of detonation cord” from the actuating device. We had no intention of implying that this was the actual system used by the perpetrators at the WTC high-rises. A real investigation might reveal such secrets. Posted Editorial Comment:
We call, once again, on everyone of conscience to evaluate impartially the evidence on both sides, as best we know it today, and join our 10,000 petition signers in the call for a new, open, subpoena-powered professional investigation, free of conflicts of interest, that will follow the scientific method and the evidence wherever it leads and let the chips fall where they may.
|